从零开始制作属于你的地图，这是一张空白地图。

		include "mercenaries.xs";
		include "ypAsianInclude.xs";
		include "ypKOTHInclude.xs";
	
		void main(void)
		{
			// ---------------------------------------- Map Info -------------------------------------------
			int playerTilesX=13200;			//设定地图X大小
			int playerTilesZ=13200;			//设定地图Z大小（帝国3的Y是高度，Z才是我们平常所用到的Y）
	
	
			//如果玩家大于4将playerTilesX与playerTilesZ改为11500（同一个值的int只能出现1次，当你需要修改数值的时候，不能再加入int）
			if (cNumberNonGaiaPlayers >4){	playerTilesX=11500;	playerTilesZ=11500;}
	
	
	
			if (cNumberNonGaiaPlayers >6){	playerTilesX=10500;	playerTilesZ=10500;}		//Modify Map X&Z Size of 6,7,8 Player
	
	
	
			int SizeX = 2*sqrt(cNumberNonGaiaPlayers*playerTilesX);
			int SizeZ = 2*sqrt(cNumberNonGaiaPlayers*playerTilesZ);
	
	
	
			string MapTerrain ="Carolinas\ground_marsh3_car";	//<-------- 地图地形，自己参照剧情编辑器 <--------
	
			string MapLighting ="319a_Snow";			//<-------- 照明，自己参照剧情编辑器 <--------
	
			string PlayerTerrain ="Carolinas\ground_marsh1_car";	//<--------- 玩家范围地形 <---------
	
	
	
	
			//设定地图XZ大小,分别调用上面用int定义的SizeX与SizeZ，即为rmSetMapSize(13200,13200);如果玩家大于4将改为11500
			rmSetMapSize(SizeX, SizeZ);
	
	
	
			rmSetMapElevationParameters(cElevTurbulence, 0.15, 2.5, 0.35, 3.0); // type, frequency, octaves, persistence, variation 
	
			rmSetMapElevationHeightBlend(1.0);
	
	
			//地形初始化，设定地图初始地形，调用上面用string定义MapTerrain，即为"Carolinas\ground_marsh3_car";
			rmTerrainInitialize(MapTerrain,6);
	
	
	
			//设定照明，调用上面用string定义MapLighting，即为"319a_Snow"
			rmSetLightingSet(MapLighting);
	
	
	
			rmSetGlobalRain(0.9);		//设定下雨
			chooseMercs();
			rmSetMapType("yucatan");
			rmSetMapType("water");
			rmSetMapType("default");	//设定地图类型，地图类型影响到宝藏
			rmSetMapType("land");
			rmSetMapType("bayou");
			rmSetSeaLevel(0); // this is height of river surface compared to surrounding land. River depth is in the river XML.
	
			rmSetStatusText("",0.01);//读取地图进度条
	
	
	
			rmPlacePlayersCircular(0.35, 0.35, 0.0);   	//圆形放置玩家
	
	
			//玩家范围
			float AreaSizePlayer = rmAreaTilesToFraction(700);
			for(i=1; <=cNumberNonGaiaPlayers)
			{
				int id=rmCreateArea("Player"+i);
				rmSetPlayerArea(i, id);
				rmSetAreaWarnFailure(id, false);
				rmSetAreaSize(id, AreaSizePlayer, AreaSizePlayer);
				rmSetAreaLocPlayer(id, i);
				rmSetAreaCoherence(id, 0.85);
				rmSetAreaSmoothDistance(id, 2);
				rmSetAreaMinBlobs(id, 1);
				rmSetAreaMaxBlobs(id, 1);
				rmSetAreaTerrainType(id,PlayerTerrain);
				rmBuildArea(id);
			}
	
	
			//定义城镇中心
			int TownCenterID = rmCreateObjectDef("player TC");
			if (rmGetNomadStart())
			{
				rmAddObjectDefItem(TownCenterID, "CoveredWagon", 1, 0.0);
			}
			else
			{
				rmAddObjectDefItem(TownCenterID, "TownCenter", 1, 0);
			}
			rmSetObjectDefMinDistance(TownCenterID, 0.0);
			rmSetObjectDefMaxDistance(TownCenterID, 20.0);
			for(i=1; <=cNumberNonGaiaPlayers)
			{	//放置城镇中心，rmPlaceObjectDefAtLoc第二个值为被放置玩家对象，这里使用了for循环，循环值=1，<=玩家人数，所以会放置所有玩家的城镇中心。
				rmPlaceObjectDefAtLoc(TownCenterID, i, rmPlayerLocXFraction(i), rmPlayerLocZFraction(i));
			}
	
	
			//定义起始单位（civs.xml定义那些开局单位）
			int startingUnits = rmCreateStartingUnitsObjectDef(5.0);
			rmSetObjectDefMinDistance(startingUnits, 6.0);
			rmSetObjectDefMaxDistance(startingUnits, 10.0);
	
			for(i=1; <=cNumberNonGaiaPlayers)
			{
				//我暂时只能告诉你这个是调用城镇中心坐标，不解释太多，解释太多你听不懂。另外留意下for(i=1;<=xx){}，这是是c++的一种循环格式。
				vector TCLocation = rmGetUnitPosition(rmGetUnitPlacedOfPlayer(TownCenterID, i));
	
				//放置起始单位
				rmPlaceObjectDefAtLoc(startingUnits, i, rmXMetersToFraction(xsVectorGetX(TCLocation)), rmZMetersToFraction(xsVectorGetZ(TCLocation)));
			}
	
			
	
	
	
	
			rmSetStatusText("",0.50);//读取地图进度条
	
	
	
	
	
			rmSetStatusText("",1.00);//读取地图进度条
		} //END